Open Access

An FPGA Implementation of -Regular Low-Density Parity-Check Code Decoder

EURASIP Journal on Advances in Signal Processing20032003:169168

DOI: 10.1155/S1110865703212105

Received: 28 February 2002

Published: 20 May 2003


Because of their excellent error-correcting performance, low-density parity-check (LDPC) codes have recently attracted a lot of attention. In this paper, we are interested in the practical LDPC code decoder hardware implementations. The direct fully parallel decoder implementation usually incurs too high hardware complexity for many real applications, thus partly parallel decoder design approaches that can achieve appropriate trade-offs between hardware complexity and decoding throughput are highly desirable. Applying a joint code and decoder design methodology, we develop a high-speed -regular LDPC code partly parallel decoder architecture based on which we implement a -bit, rate- -regular LDPC code decoder on Xilinx FPGA device. This partly parallel decoder supports a maximum symbol throughput of Mbps and achieves BER at 2 dB over AWGN channel while performing maximum decoding iterations.


low-density parity-check codes error-correcting coding decoder FPGA

Authors’ Affiliations

Department of Electrical, Computer, and Systems Engineering, Rensselaer Polytechnic Institute
Department of Electrical and Computer Engineering, University of Minnesota


© Copyright © 2003 Hindawi Publishing Corporation 2003