Skip to main content
  • Research Article
  • Published:

Denoising Using Blind Source Separation for Pyroelectric Sensors

Abstract

This paper deals with a process of denoising based on a Blind Source Separation (BSS) method. This technique is inserted in an experimental device of nondestructive testing. Its excitation is a laser beam and its detectors are pyroelectric sensors. The latter are sensitive to the temperature. As they are also piezoelectric, they are particularly sensitive to the environmental noise. Therefore, it is necessary to denoise them. With this aim in view, a technique of blind source separation is implemented. One source corresponds to the incidental beam and the other sources are various noise. A judicious experimental device was designed in the laboratory. It fits to the requirements of the BSS technique, and it allows indeed a restoration of the incident signal.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Regis Huez.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Huez, R., Nuzillard, D. & Billat, A. Denoising Using Blind Source Separation for Pyroelectric Sensors. EURASIP J. Adv. Signal Process. 2001, 456183 (2001). https://doi.org/10.1155/S1110865701000142

Download citation

  • Received:

  • Revised:

  • Published:

  • DOI: https://doi.org/10.1155/S1110865701000142

Keywords